Fujifilm

2250mAh NP-W235 Replacement Battery for Fujifilm X-T4

The 2250mAh Fujifilm NP-W235 Camera Battery is specially designed as a high-quality replacement battery for Fujifilm X-T4. With stable performance, long-lasting power capacity, and excellent compatibility, this Fujifilm NP-W235 battery helps restore your equipment’s mobility and extends its daily working time. It is an ideal choice for users who need to replace an aging or damaged battery while keeping their Fujifilm X-T4 running efficiently.
2250mAh NP-W235 Replacement Battery for Fujifilm X-T4

Product Specifications
Brand: Camera Battery for Fujifilm
Battery Type: Li-ion
Battery Voltage: 7.2V
Battery Capacity: 2250mAh
Warranty: 30 Days Money Back, 1 Year Warranty.
Over 500-800 times of charge and discharge.

Compatible Part Numbers:
NP-W235

Compatible Models:
Fujifilm X-T4

Important Usage Tips and Safety Precautions
For safe and effective operation of the 2250mAh Fujifilm NP-W235 Camera Battery for Fujifilm X-T4, please consider the following precautions:
Do not expose the battery to water, moisture, or extreme heat.
Do not disassemble, modify, or damage the battery, as this may cause safety risks.
Avoid using damaged charging cables or incompatible adapters.
If the Fujifilm NP-W235 battery becomes swollen, overheated, or shows unusual performance, stop using it immediately and seek professional assistance.
Allow the Fujifilm NP-W235 battery to complete several normal charge and discharge cycles after installation to help achieve optimal performance. A Reliable Power Solution for Your Fujifilm X-T4.

How to Properly Maintain Your Fujifilm NP-W235 Camera Battery
To maximize the lifespan and performance of your Fujifilm NP-W235 Camera Battery, following proper maintenance habits is important:
Avoid frequent full discharge: Try to recharge the battery before it completely runs out of power. Keeping the Fujifilm NP-W235 battery level between approximately 20% and 80% can help reduce battery stress.
Use the correct charger: Always use a compatible charger with the correct voltage and specifications to ensure safe and efficient charging.
Keep the battery temperature controlled: Excessive heat can affect Fujifilm NP-W235 battery performance and lifespan. Avoid using your equipment on soft surfaces that block ventilation, and keep the device away from high-temperature environments.
Charge regularly during storage: If you do not use your equipment for an extended period, charge the battery to around 40%-60% and store it in a cool, dry place.
Maintain clean connections: Keep the Fujifilm NP-W235 battery contacts and equipment interior free from dust to ensure stable power transmission.

A Reliable Power Solution for Your Fujifilm X-T4
The 2250mAh Fujifilm NP-W235 Camera Battery for Fujifilm X-T4 combines dependable power, convenient installation, and long-term usability. With proper care and responsible usage, this replacement battery can help extend your laptop’s service life and provide a more stable mobile computing experience.

Choose a quality replacement battery for Fujifilm NP-W235 to bring your Fujifilm X-T4 back to its full potential and enjoy reliable performance wherever you go.

PR
1150mAh NP-140 Replacement Battery for Fujifilm FinePix S100FS S200FS S200EXR S205EXR
Our brand-new Camera Battery compatible with Fujifilm NP-140 is engineered to deliver long-lasting and stable performance. It is designed to meet rigorous standards, ensuring full compatibility with devices such as the Fujifilm FinePix S100FS S200FS S200EXR S205EXR. This battery comes with a one-year warranty and has passed essential safety certifications including CE, RoHS, and ISO9001. Choose our Fujifilm NP-140 battery for a power solution that combines quality, safety, and convenience. Invest in authentic performance and keep your Fujifilm FinePix S100FS S200FS S200EXR S205EXR running like new.
1150mAh NP-140 Replacement Battery for Fujifilm FinePix S100FS S200FS S200EXR S205EXR

Product Specifications
Brand: Fujifilm Camera Battery
Battery Type: Li-ion
Battery Voltage: 7.4V
Battery Capacity: 1150mAh
Warranty: 30 Days Money Back, 1 Year Warranty.
Over 500-800 times of charge and discharge.

Compatible Part Numbers:
- NP-140
Compatible Models:
Fujifilm FinePix S100FS S200FS S200EXR S205EXR

As a professional manufacturer, we offer a 100% brand new Li-ion battery for Fujifilm NP-140, built with genuine Grade A cells to ensure high quality and stable performance. Certified by CE, ROHS, and MSDS, this battery delivers excellent discharge characteristics and supports over 500–800 charge cycles.

It is fully compatible with original Fujitsu equipment and features multiple built-in protections including over-charge, over-current, over-voltage, and short-circuit prevention. Designed with an advanced printed circuit board (PCB), it provides reliable and safe operation.

Backed by a one-year warranty, 30-day money-back guarantee, and 100% secure shopping assurance, we provide premium performance at a competitive price.

To ensure optimal performance and longevity of your Fujifilm NP-140 Battery, please adhere to the following guidelines:
1.Storage - Store the battery NP-140 in a clean, dry, and cool environment, away from heat sources and metal objects. During storage, the battery will gradually self-discharge. It is recommended to store it at approximately 40% state of charge.
2.Charging and Discharging - Unlike older battery technologies, lithium-ion batteries do not require frequent full discharge cycles. Only perform a full discharge approximately every 30 charging cycles. Avoid charging the battery beyond its specified threshold voltage.
3.Regular Use - Avoid leaving the battery NP-140 idle for extended periods. It is advisable to use the battery at least once every two to three weeks. If the battery has been unused for a long time, follow the initial break-in procedure as recommended for new batteries.
4.Calibration - If the battery indicator shows 76% or less during use, fully charge it, then fully discharge it, and finally recharge it completely to calibrate the battery level accuracy.
5.Usage on Fixed Power - Consider removing the battery from the laptop when using a fixed power source for extended periods to reduce unnecessary charging cycles.
6.Short-Circuit Prevention - Do not short-circuit the battery, as this can cause serious damage and compromise safety.
By following these practices, you can help maintain the performance and extend the life of your Fujifilm NP-140 Battery.
1500mAh/11WH NP-150 Replacement Battery for Fujifilm S5 S8 Pro/IS Pro
Our brand-new Camera Battery compatible with Fujifilm NP-150 is engineered to deliver long-lasting and stable performance. It is designed to meet rigorous standards, ensuring full compatibility with devices such as the Fujifilm S5 S8 Pro/IS Pro. This battery comes with a one-year warranty and has passed essential safety certifications including CE, RoHS, and ISO9001. Choose our Fujifilm NP-150 battery for a power solution that combines quality, safety, and convenience. Invest in authentic performance and keep your Fujifilm S5 S8 Pro/IS Pro running like new.
1500mAh/11WH NP-150 Replacement Battery for Fujifilm S5 S8 Pro/IS Pro

Product Specifications
Brand: Fujifilm Camera Battery
Battery Type: Li-ion
Battery Voltage: 7.4V
Battery Capacity: 1500mAh/11WH
Warranty: 30 Days Money Back, 1 Year Warranty.
Over 500-800 times of charge and discharge.

Compatible Part Numbers:
- NP-150
- NP150
Compatible Models:
Fujifilm S5 S8 Pro/IS Pro

As a professional manufacturer, we offer a 100% brand new Li-ion battery for Fujifilm NP-150, built with genuine Grade A cells to ensure high quality and stable performance. Certified by CE, ROHS, and MSDS, this battery delivers excellent discharge characteristics and supports over 500–800 charge cycles.

It is fully compatible with original Fujitsu equipment and features multiple built-in protections including over-charge, over-current, over-voltage, and short-circuit prevention. Designed with an advanced printed circuit board (PCB), it provides reliable and safe operation.

Backed by a one-year warranty, 30-day money-back guarantee, and 100% secure shopping assurance, we provide premium performance at a competitive price.

To ensure optimal performance and longevity of your Fujifilm NP-150 Battery, please adhere to the following guidelines:
1.Storage - Store the battery NP-150 in a clean, dry, and cool environment, away from heat sources and metal objects. During storage, the battery will gradually self-discharge. It is recommended to store it at approximately 40% state of charge.
2.Charging and Discharging - Unlike older battery technologies, lithium-ion batteries do not require frequent full discharge cycles. Only perform a full discharge approximately every 30 charging cycles. Avoid charging the battery beyond its specified threshold voltage.
3.Regular Use - Avoid leaving the battery NP-150 idle for extended periods. It is advisable to use the battery at least once every two to three weeks. If the battery has been unused for a long time, follow the initial break-in procedure as recommended for new batteries.
4.Calibration - If the battery indicator shows 76% or less during use, fully charge it, then fully discharge it, and finally recharge it completely to calibrate the battery level accuracy.
5.Usage on Fixed Power - Consider removing the battery from the laptop when using a fixed power source for extended periods to reduce unnecessary charging cycles.
6.Short-Circuit Prevention - Do not short-circuit the battery, as this can cause serious damage and compromise safety.
By following these practices, you can help maintain the performance and extend the life of your Fujifilm NP-150 Battery.
1000MAH/3.5Wh NP-50 Replacement Battery for Fujifilm NP-50A F665 F750 F75 F100 F900 XF1 X10 X20 F85
Our brand-new Camera Battery compatible with Fujifilm NP-50 is engineered to deliver long-lasting and stable performance. It is designed to meet rigorous standards, ensuring full compatibility with devices such as the Fujifilm NP-50A F665 F750 F75 F100 F900 XF1 X10 X20 F85. This battery comes with a one-year warranty and has passed essential safety certifications including CE, RoHS, and ISO9001. Choose our Fujifilm NP-50 battery for a power solution that combines quality, safety, and convenience. Invest in authentic performance and keep your Fujifilm NP-50A F665 F750 F75 F100 F900 XF1 X10 X20 F85 running like new.
1000MAH/3.5Wh NP-50 Replacement Battery for Fujifilm NP-50A F665 F750 F75 F100 F900 XF1 X10 X20 F85

Product Specifications
Brand: Fujifilm Camera Battery
Battery Type: Li-ion
Battery Voltage: 3.6V-3.7V
Battery Capacity: 1000MAH/3.5Wh
Warranty: 30 Days Money Back, 1 Year Warranty.
Over 500-800 times of charge and discharge.

Compatible Part Numbers:
- NP-50A
- Kodak_KLIC-7004
- Pentax_DL-I68
- F50fd
- F60fd
- F100fd
- F75EXR
- F200EXR
Compatible Models:
partnumber: Kodak KLIC-7004 Pentax DL-I68
FinePix F75EXR
FinePix F Series F100fd / F200EXR / F300EXR / F50fd / F60fd / F70 EXR / F80EXR
FinePix Z Series Z100FD
Real 3D W3
F50fd F60fd F100fd F75EXR F85EXR F200EXR F305EXR 3DW3 S10 S12 F605 F505 F305 F85 F775 X10 X20

As a professional manufacturer, we offer a 100% brand new Li-ion battery for Fujifilm NP-50, built with genuine Grade A cells to ensure high quality and stable performance. Certified by CE, ROHS, and MSDS, this battery delivers excellent discharge characteristics and supports over 500–800 charge cycles.

It is fully compatible with original Fujitsu equipment and features multiple built-in protections including over-charge, over-current, over-voltage, and short-circuit prevention. Designed with an advanced printed circuit board (PCB), it provides reliable and safe operation.

Backed by a one-year warranty, 30-day money-back guarantee, and 100% secure shopping assurance, we provide premium performance at a competitive price.

To ensure optimal performance and longevity of your Fujifilm NP-50 Battery, please adhere to the following guidelines:
1.Storage - Store the battery NP-50 in a clean, dry, and cool environment, away from heat sources and metal objects. During storage, the battery will gradually self-discharge. It is recommended to store it at approximately 40% state of charge.
2.Charging and Discharging - Unlike older battery technologies, lithium-ion batteries do not require frequent full discharge cycles. Only perform a full discharge approximately every 30 charging cycles. Avoid charging the battery beyond its specified threshold voltage.
3.Regular Use - Avoid leaving the battery NP-50 idle for extended periods. It is advisable to use the battery at least once every two to three weeks. If the battery has been unused for a long time, follow the initial break-in procedure as recommended for new batteries.
4.Calibration - If the battery indicator shows 76% or less during use, fully charge it, then fully discharge it, and finally recharge it completely to calibrate the battery level accuracy.
5.Usage on Fixed Power - Consider removing the battery from the laptop when using a fixed power source for extended periods to reduce unnecessary charging cycles.
6.Short-Circuit Prevention - Do not short-circuit the battery, as this can cause serious damage and compromise safety.
By following these practices, you can help maintain the performance and extend the life of your Fujifilm NP-50 Battery.
1260mAh NP-W126S Replacement Battery for Fujifilm X-H1 X-Pro2 X-Pro1 X-T3 X-T2 XT30
Our brand-new Camera Battery compatible with Fujifilm NP-W126S is engineered to deliver long-lasting and stable performance. It is designed to meet rigorous standards, ensuring full compatibility with devices such as the Fujifilm X-H1 X-Pro2 X-Pro1 X-T3 X-T2 XT30. This battery comes with a one-year warranty and has passed essential safety certifications including CE, RoHS, and ISO9001. Choose our Fujifilm NP-W126S battery for a power solution that combines quality, safety, and convenience. Invest in authentic performance and keep your Fujifilm X-H1 X-Pro2 X-Pro1 X-T3 X-T2 XT30 running like new.
1260mAh NP-W126S Replacement Battery for Fujifilm X-H1 X-Pro2 X-Pro1 X-T3 X-T2 XT30

Product Specifications
Brand: Fujifilm Camera Battery
Battery Type: Lithiumion
Battery Voltage: 7.2V 8.4V
Battery Capacity: 1260mAh
Warranty: 30 Days Money Back, 1 Year Warranty.
Over 500-800 times of charge and discharge.

Compatible Part Numbers:
- NP-W126S
Compatible Models:
Fujifilm X-H1 X-Pro2 X-Pro1 X-T3 X-T2 XT30 X-T20 X-T10 X-T1 X-T2 X-A3 X-A5 X-A2 X-A1 X-A20 X-A7 X-PRO1 X-PRO2 X-E2S X-E1 X-E2 X-E3 X-M1 X-T200 XS-10 HS50EXR HS30EXR HS33EXR

As a professional manufacturer, we offer a 100% brand new Lithiumion battery for Fujifilm NP-W126S, built with genuine Grade A cells to ensure high quality and stable performance. Certified by CE, ROHS, and MSDS, this battery delivers excellent discharge characteristics and supports over 500–800 charge cycles.

It is fully compatible with original Fujitsu equipment and features multiple built-in protections including over-charge, over-current, over-voltage, and short-circuit prevention. Designed with an advanced printed circuit board (PCB), it provides reliable and safe operation.

Backed by a one-year warranty, 30-day money-back guarantee, and 100% secure shopping assurance, we provide premium performance at a competitive price.

To ensure optimal performance and longevity of your Fujifilm NP-W126S Battery, please adhere to the following guidelines:
1.Storage - Store the battery NP-W126S in a clean, dry, and cool environment, away from heat sources and metal objects. During storage, the battery will gradually self-discharge. It is recommended to store it at approximately 40% state of charge.
2.Charging and Discharging - Unlike older battery technologies, lithium-ion batteries do not require frequent full discharge cycles. Only perform a full discharge approximately every 30 charging cycles. Avoid charging the battery beyond its specified threshold voltage.
3.Regular Use - Avoid leaving the battery NP-W126S idle for extended periods. It is advisable to use the battery at least once every two to three weeks. If the battery has been unused for a long time, follow the initial break-in procedure as recommended for new batteries.
4.Calibration - If the battery indicator shows 76% or less during use, fully charge it, then fully discharge it, and finally recharge it completely to calibrate the battery level accuracy.
5.Usage on Fixed Power - Consider removing the battery from the laptop when using a fixed power source for extended periods to reduce unnecessary charging cycles.
6.Short-Circuit Prevention - Do not short-circuit the battery, as this can cause serious damage and compromise safety.
By following these practices, you can help maintain the performance and extend the life of your Fujifilm NP-W126S Battery.